Specialised Mole Activities

Hot on the heels of the previous update as to the optimal working conditions for the Moles of Kirkby Stephen, more digging has occurred!


The signal box requires power and other cables running to it. These are carried in ducts. The ducts need burying underground. The digger had issues trying to dig a trench as the water table was too high. So it's a case of the Moles' talents being required!


A lot of the run has already been completed, the ducts dropped in and the trench filled accordingly with sand. The last section under the bridge and into the box itself needed tackling once the rodding run was in place and before the lead out bench and walkway could be completed.


So, the Moles set to; having established the fixed points in the run, and the best route between them. This wasn't set in stone: rather, stone was found that caused slight diversions!!








Thanks for reading. More news soon..

Comments

Post a Comment

Popular posts from this blog

Fitting The NER Lever Frame

Image
Hello all! Today we're going to show how the unique North Eastern Railway Central Division level frame recovered from Pesspool Junction will be fitted into the S&DR signal box.  The 1861 box at the end of it's life. Note the additional window to the locking room, seen on the left hand wall in this picture. This is the operating floor plan showing aperture for frame and *indicative* joist locations to accommodate this. Dimensions: Apologies: all dimensions used here are imperial as the equipment and building itself looks to have been designed and built using these. They also work out very nicely! Front to back, the surviving box structure measures 10’ inside the walls. This has been used in this plan, and is assumed to be correct. The aperture for the frame to sit is drawn here as being 6” from the front wall. This is our datum, from which the other measurements are derived. This can be adjusted plus or minus 2”, but will then shuffle the rest of the aperture across. If it...
Read more

The Big One

Image
We’ve just had a very busy 4 days, in conjunction with track modifications and with great support from Lampitt Rail Services. In that time, we have successfully planted 5 signal posts, dismantled a crossover and moved the components to their new locations, ready for reinstatement. Lots more has gone on at the same time, in the background, that will appear in future posts. This entry looks at the signal post planting… Teamwork with the spoons: making adjustments to the hole for No.4 signal Still more to dig out ... Battling the ground foe the fixed stop signal Trying to get the last bits out of the bottom Swallowed by the ground, or the mole returning home? (Don't worry - this was posed!) Well, you can’t plant a post without preparing the ground for it first. So the Moles of Kirkby Stephen were at it again! The locations for the posts and the depths of the holes depended upon a fair few factors, such as visibility of the signals, distances from the track and pointwork they are prote...
Read more

Welsh Slate

Image
We have at last managed to get 4 coats of paint onto the fascia boarding of the signalbox and the attendant woodwork, leaving us free to commence slating the roof at last. We were keen to create a period look and therefore opted to use reclaimed welsh slates some of which I would guess have already seen many years of service, but were still good for many more. In the past as you will recall that rain has, on many occasions, brought work to a frustrating standstill and created havoc with work we thought was complete. That being said, slating is one job you can carry on with rain or not and so we did on Tuesday, ignoring the showers, getting wet, and revelling at being able to stick two fingers up at the weather. It is not going to improve much at this time of year so I suppose we will get several more soakings before the roof is watertight but I will tell you about them in due course.   
Read more